How to fix FANATEC CSL Elite Racing Wheel auto calibration?
If the auto calibration is not working properly after switching on the CSL Elite Racing Wheel, make sure that you have updated your CSL Elite Racing Wheel to the latest firmware version.
What to do if FANATEC CSL Elite Racing Wheel tuning display is not working?
If the tuning display does not show anything or is not working properly: * Try another steering wheel. If this is also not working properly the CSL Elite Racing Wheel might be damaged. * Check the pins inside the quick release of the steering wheel, ensuring these are not bent or damaged.
How to fix FANATEC CSL Elite Racing Wheel not centering after calibration?
If the attached steering wheel doesn’t go to the correct center position after the calibration run at startup of your FANATEC CSL Elite Racing Wheel, check your Tuning Menu settings. The value for SPR (spring) must be higher than ‘000’, as this effect is required to make correct centering. The default value is ‘100’.
What to do if FANATEC CSL Elite Racing Wheel auto calibration is not working?
If the auto calibration is not working properly after switching on your FANATEC CSL Elite Racing Wheel, make sure that you have updated your racing wheel to the latest firmware version which can be downloaded from the Downloads section of the Fanatec website.
How to fix FANATEC Video Game Controller tuning display if it is not working?
If the tuning display of your FANATEC Video Game Controller is not working properly, try using another steering wheel. Also, check the pins inside the quick release of the steering wheel to ensure they are not bent or damaged.
Why FANATEC CSL Elite Racing Wheel doesn’t go to correct center position?
If, after the calibration run at startup, the attached steering wheel doesn’t go to the correct center position, check your tuning menu settings. The value for SPR (spring) must be higher than ‘000’ as this effect is required to make correct centering. The default value is ‘100’.
What to do if FANATEC CSL Elite Racing Wheel motor has switched OFF?
If the CSL Elite Racing Wheel motor switches OFF after playing for a while, it may be because the temperature is exceeding the upper limit. Let your CSL Elite Racing Wheel cool down before continuing to use it. If this happens consecutively, contact customer support.
What to do if FANATEC CSL Elite Racing Wheel becomes weaker?
If the CSL Elite Racing Wheel seems to become weaker or is fading after playing for a while, it could be because the motor temperature is close to the upper limit. Allow your CSL Elite Racing Wheel to cool down before continuing use.
Why FANATEC CSL Elite Racing Wheel fan is always working?
If the fan is always working at full speed even though the CSL Elite Racing Wheel was just powered ON and hasn't heated up due to driving yet, it may be due to a malfunctioning temperature sensor. Note: The room temperature should be above 20°C.
Why does FANATEC CSL Elite Racing Wheel motor switch off after playing?
The FANATEC CSL Elite Racing Wheel motor might switch off after playing if the temperature exceeds the upper limit. In this case, let your racing wheel cool down before continuing use. If this happens consecutively, contact customer support.
General| Force Feedback | Yes |
|---|---|
| Wheel Diameter | 30 cm |
| Detachable Wheel | Yes |
| Pedal Ports | 1 |
| Pedals Included | Yes |
| Connection Type | USB |
| Compatibility | PC |
| Pedals | CSL Elite Pedals |
| Mounting | Table clamp |
| Rotation | 1080 degrees |
Information about photosensitive epileptic seizures related to video games.
Information about musculoskeletal disorders linked to electronic input devices.
Precautions for device use, temperature, breaks, children, and electrical safety.
Clarifies included items, optional peripherals, and system compatibility.
Lists all items included in the package and preparation steps.
Guides for table clamp, hard-mounting, and attaching/detaching wheels.
Details on connecting shifters, pedals, handbrake, and power supply.
Guides for updating firmware, PC drivers, and using the driver software.
Procedures for start-up, calibration, and using the Tuning Menu settings.
Explains driver tests, RevLEDs, cooling, and specific tuning parameters like FEI/BRF.
Solutions for issues like centering, detection, heat, and calibration errors.
Information on FCC, CE compliance, serial numbers, trademarks, and disposal.
Details the one-year warranty, exclusions, and customer support information.
To Next Page
