How to fix FANATEC CSL Elite Wheel Base+ steering wheel not centering?
If the attached steering wheel doesn’t go to the correct center position after the calibration run at startup, check your Tuning Menu settings. The value for SPR (spring) must be higher than ‘000’, as this effect is required to make correct centering. The default value is ‘100’.
What to do if FANATEC CSL Elite Wheel Base+ auto calibration is not working?
Make sure that you have updated your CSL Elite Wheel Base+ to the latest firmware version which can be downloaded from the Downloads section of the Fanatec website www.fanatec.com.
How to troubleshoot FANATEC Video Gaming Accessories tuning display?
If the tuning display isn't showing anything or isn't working correctly, try using another steering wheel to see if the issue persists. Also, examine the pins inside the quick release of the steering wheel to ensure they are not bent or damaged. If another steering wheel also doesn't work properly, the CSL Elite Wheel Base+ might be damaged.
What to do if FANATEC CSL Elite Wheel Base+ motor switches off?
If the motor of your CSL Elite Wheel Base+ switches off after playing, it's likely due to the temperature exceeding the upper limit. Allow your CSL Elite Wheel Base+ to cool down before using it again. If this continues to happen, please contact customer support.
Why does my FANATEC CSL Elite Wheel Base+ become weaker after playing?
If your CSL Elite Wheel Base+ seems weaker or is fading after some time, it could be because the motor temperature is nearing its upper limit. Give your CSL Elite Wheel Base+ some time to cool down before you continue playing.
Provides general information, disclaimers, and important notes about the product and manual.
Outlines compatible Fanatec steering wheels, peripherals, and platforms for the CSL Elite Wheel Base+.
Lists all items included in the CSL Elite Wheel Base+ box.
Instructions for planning setup and mounting the wheel base using the table clamp.
Detailed steps for hard-mounting the CSL Elite Wheel Base+ using screws.
Steps for attaching and detaching Fanatec steering wheels to the base.
Instructions for mounting shifter paddles and connecting peripherals.
Guide on updating the wheel base firmware and PC drivers.
Step-by-step guide for powering on and calibrating the CSL Elite Wheel Base+.
Details on accessing and adjusting various wheel base settings.
Explains RevLEDs and the cooling system of the CSL Elite Wheel Base+.
Describes hotkeys for tuning menu, calibration, and switching operation modes.
Instructions for calibrating H-pattern shifters.
Guidance on cleaning the device and resolving common operational issues.
Information regarding FCC and CE compliance for the product.
Details the warranty period, coverage, and conditions.
General| Force Feedback | Yes |
|---|---|
| Max Torque | 6 Nm |
| Detachable Wheel | Yes |
| Connectivity | USB |
| Motor | Servomotor |
| Compatibility | PC |
| Power Supply | External Power Supply |
| Rotation | 1080 degrees |
| Dimensions | 150 mm |
To Next Page