FANATEC CSL User Manual (English)

Other manuals for FANATEC CSL

Manual24 pages

User Guide6 pages

Questions and Answers:

R
Ronald LawrenceJul 28, 2025
What to do if FANATEC Video Gaming Accessories CSL Pedals are not recognized by PC driver or wheel base?
- C
  cassandra79Jul 28, 2025
  If your PC driver or wheel base isn't recognizing the FANATEC CSL Pedals, ensure you've updated your wheel base and ClubSport USB Adapter firmware to the newest version available in the latest PC driver, which can be downloaded from fanatec.com/driver. Also, verify that you're using the RJ12 cable that came with the CSL Pedals package. Finally, double-check that the RJ12 cables are correctly plugged into the appropriate ports on the CSL Pedals' gas pedal module, as well as the corresponding ports on the wheel base and ClubSport USB Adapter.
B
Brandon PopeAug 5, 2025
Why won't my PC boot when the FANATEC Music Pedal (CSL Pedals LC) is connected via USB?
- J
  James ThomasAug 5, 2025
  If your PC doesn't boot when the FANATEC CSL Pedals LC is connected via USB before Windows starts, this is due to certain main board manufacturers' BIOS. To solve this, boot the PC first, and then connect the CSL Pedals LC via USB.
F
freyesAug 12, 2025
What to do if pedal signal of the FANATEC CSL Pedals and / or CSL Pedals LC in-game behaviour feels incorrect?
- D
  Donald HopkinsAug 12, 2025
  If the pedal signal of the CSL Pedals and / or CSL Pedals LC in-game behavior feels incorrect, connect the CSL Pedals LC to a PC or a wheel base. Start the Fanatec Control Panel and check the indicator bars of each pedal while pressing each corresponding pedal. You may need to manually calibrate the minimum and / or maximum positions or reselect ‘...Manual Mode’ to adjust the pedal signal behavior as desired.
M
michaelsheltonAug 19, 2025
How to fix FANATEC Music Pedal (CSL Pedals Load Cell Kit) not being recognised?
- J
  Joshua GutierrezAug 19, 2025
  If the PC driver or the wheel base does not recognise the CSL Pedals Load Cell Kit: * Make sure that you have updated your wheel base and CSL Pedals LC firmware to the latest firmware version contained within the latest PC driver which can be downloaded from fanatec.com/driver. * Ensure that you are using the RJ12 cable included with your CSL Pedals package. * Ensure that the RJ12 cables are plugged in the correct ports of the CSL Pedals Load Cell Kit module and the correct port of the wheel base.

FANATEC CSL Specifications

General

Force Feedback	Yes
Connectivity	USB
Compatibility	PC, PlayStation, Xbox
Wheel Diameter	30 cm
Category	Racing Wheel
Direct Drive	No
Quick Release	Yes
Rotation	1080 degrees
Mounting	Clamp or Hardmount