F&U FL28101 - Recording Functions

31
power or use the RC. The default value is
“Disable”.
Channel
Scan Lock
(OFF/ON)
OFF
If the item is set to “On”, then the user can’t scan
or search the TV. If set to“Off”, Channel Scan
item is effective. The default is Off.
Aspect
Ratio Lock
(OFF/ON)
OFF
If set to “On”, the “ASPECT” can not be adjusted
and it is locked.
Source
Lock
(OFF/ON)
OFF
To use this setting, the user must firstly set the
hotel mode to "on", otherwise this item cannot be
adjusted. If this item is set to "on",
the next
source lock will be actived. The default value is
off.
Press
[Enter] to
Clear
Hotel
Mode Set
N/A
N/A
Select the item and press the ENTER button on
the RC, It will reset the hotel mode settings to the
default value.
4.7 How to user Record
The HK-RTD2957 supports two types of recording:
A、 Direct Record
B、 Subscribe Record
Direct Record。
1. In the DTV source, you can start the recording function by pressing the “REC” key while a
program is playing. Before that, you have to make sure that the USB storage device is
inserted and the device checking and Initialization has been done.
If you press “REC” key when there’s no USB storage device inserted, a prompt window
will appear, as follows.