EN
us-pc@fangor.cn
17
Connect:
a. Make sure that the laptop has enough power. If the power is insufcient, you need to connect the laptop to the power
supply and turn on the computer.
b. Connect the adapter(Power Bank) rst and keep it charged.
c. Find the HDMI data transmission interface, use a HDMI to HDMI cable to connect the notebook/PC with the portable
monitor, and the image will be copied and displayed immediately.
Note:
You need to plug in the power supply and keep it powered on before connecting the HDMI to HDMI cable to the monitor.
If the sequence is wrong, it will cause no input on the portable monitor. At this time, you need to unplug the data
transmission cable, plug it in again and check whether plugged in properly and tight.
EN
3. Split screen expansion function
(1) Four modes
Copy mode:
laptop screen display is consistent with portable monitor's. In this mode, pictures can be enlarged to bring you a clearer
visual effect, avoiding the visual fatigue caused by the small screen.
Split screen mode:
In this mode, the screen display of the laptop is different from that of the portable display screen, and multiple operation
requirements can be performed at the same time. Avoid the trouble caused by the continuous switching between two or
more pages.
Second screen mode only:
In this mode, no display on the notebook, the picture only show on the monitor.
Remain connected and use the monitor directly.
(2) Method of operation
Keep the power supply and the HDMI / Type-C data transmission cable well connected.
Click the notebook button and the letter "P" button at the same time, 4 mode selection boxes will pop up on the
notebook. Include Copy mode, Split screen mode, Computer mode only, Second screen mode only.
Choose the appropriate working mode according to your needs.
Computer mode only
In this mode, no display on the monitor, the picture only show on the notebook.
To Next Page
Loading...