FANGOR F-157 - Customer Support Information

4. The monitor displays "no cable"
During the connection process, you need to connect the power supply rst, and then connect the Type-C / HDMI data
transmission line. If you connect in the wrong order, the display will show "No cable", you only need to unplug the Type-C /
HDMI data transmission line. Re-insert the port, it can be used normally.
If "No cable" appears on the display during use, it may be that the power supply or data transmission interface is loose.
You need to check whether the port is loose and plugged in, which can restore normal use.
If still not available, please contact us via us-pc@fangor.cn
5. During use, the monitor shows "no signal"
It may be caused by the loose HDMI / Type-C data transmission line. just plug in the HDMI / Type-C cable Tightly.
If there is still no display, please contact us ASAP
6. When using the split-screen mode, the image size of the laptop screen and the monitor may be inconsistent
You need to adjust the resolution of the laptop screen to be consistent with the resolution of the monitor.
No need to adjust the screen resolution of the monitor.Note:
Customer support
This product is warranted to be free from defects in material and workmanship for a period of one year from the date of
original purchase. During this period, you can contact us to repair or replacement of this product or component found to
be defective.
This warranty does not cover , wear from normal use, use notice conformity with the printed directions,
or damage to the product resulting from accident, alteration, abuse, or misuse. This warranty extends only to the original
consumer purchaser or gift recipient. keep the original sales receipt, as proof of purchase is required to make a warranty
claim. This warranty is void if the product is used for any voltage and waveform other than as on the specied rating on the
label.
Reply email within 24 hours
Except statutory holidays
FANGOR Ofcial Mailbox: us-pc@fangor.cn
EN
us-pc@fangor.cn
31
EN