Why is my Fanimation AIRE DUO LP8066LBN so noisy?
- AAntonio MackAug 6, 2025
A noisy Fanimation fan can stem from several issues: * Blades not attached to the fan. * Loose screws in the motor housing. * Loose screws securing fan blade holders to the motor flywheel. * Wire connectors inside the housing rattling. * Motor noise caused by a solid-state variable speed control (in which case, choose an alternative control method). * Loose screws holding the blades to the blade holders. * A loose lower housing support set screw. To address this, ensure all screws are snug (but not overtightened), wire connectors are secure and not rattling, and the blades are properly attached. If you're using a solid-state variable speed control, consider switching to a different type.