Fanimation AIRE DROP Studio LP8068LMW User Manual (English)

Questions and Answers:

T
Thomas BerryAug 6, 2025
What to do if my Fanimation Fan will not start?
- K
  kevin28Aug 6, 2025
  If your Fanimation fan won't start, there are several potential causes: * A blown fuse or circuit breaker: Check both the main and branch circuit fuses or circuit breakers. * Loose power line connections: Inspect the line wire connections to the fan and switch wire connections in the switch housings. Remember to turn off the main power first! * A dead remote control battery: Replace the battery with a new one. * Reverse switch in neutral position: Ensure the reversing switch is fully to one side.
D
David WilsonAug 11, 2025
What to do if my Fanimation AIRE DROP Studio LP8068LMW remote control does not work and the LED is constantly flashing?
- M
  Melissa NielsenAug 11, 2025
  If the remote control for your Fanimation fan isn't working and the control indicator LED is constantly flashing, it likely means the battery/batteries are running low. Replace them with new ones.
C
Charles GonzalezAug 18, 2025
Why is my Fanimation Fan so noisy?
- N
  Nicholas HernandezAug 18, 2025
  If your Fanimation fan is excessively noisy, here are a few things to check: * Blades not attached: Make sure the blades are properly attached to the fan. * Loose screws in the motor housing: Check and tighten any loose screws in the motor housing (but don't overtighten them). * Loose screws securing the fan blade to the motor assembly: Ensure these screws are tight. Remember to turn off the main power before checking! * Loose lower housing support set screw: Tighten the set screw securely.
M
Melissa JimenezAug 25, 2025
How to fix a Fanimation AIRE DROP Studio LP8068LMW that wobbles a lot?
- J
  Jesse WarnerAug 25, 2025
  If your Fanimation fan wobbles excessively, consider the following: * Loose setscrew and nut in downrod support: Tighten both setscrews and nuts securely in the downrod support. * Loose setscrew in downrod/hanger ball assembly: Tighten the setscrew in the downrod/hanger ball assembly. * Loose screws securing the fan blade to the motor assembly: Ensure the screws attaching the fan blade to the motor assembly are tight. * Insecure hanger bracket or ceiling outlet box: Tighten the hanger bracket screws to the outlet box, and ensure the outlet box is securely fastened.
C
Carrie WheelerAug 30, 2025
How to improve air movement with my Fanimation AIRE DROP Studio LP8068LMW Fan?
- S
  stephenpowellAug 30, 2025
  If your Fanimation fan isn't providing enough air movement, consider using a longer downrod. You can purchase a longer downrod from fanimation.com.

Fanimation AIRE DROP Studio LP8068LMW Specifications

General

Model Number	LP8068LMW
Category	Fan
Type	Ceiling Fan
Style	Modern
Finish	Matte White
Blade Span	52 inches
Number of Blades	3
Blade Pitch	12 degrees
Motor Type	DC Motor
Downrod Length	6 inches
Remote Control	Yes
Location Rating	Indoor
Motor Speed	3 speeds
Blade Finish	Matte White
Reversible Motor	Yes
Indoor/Outdoor Use	Indoor
Mounting Type	Downrod
Material	Wood