Fanimation XENO FP6729B Series

Questions and Answers

R
rodriguezrickyJul 30, 2025
What to do if my Fanimation XENO FP6729B Fan will not start?
- C
  christopherfinleyJul 30, 2025
  If your Fanimation fan isn't starting, here are a few things to check: * Inspect the main and branch circuit fuses or circuit breakers. * Check the wire connections to the fan and switch wire connections in the switch housings, remembering to turn off the main power first. * Ensure the reversing switch is fully to one side. * If you're using a remote, try replacing the battery.
C
Cynthia HigginsAug 8, 2025
Why is my Fanimation Fan so noisy?
- M
  Mary HornAug 9, 2025
  If your Fanimation Fan sounds noisy, here are a few things to check: 1. Make sure the blades are attached to the fan. 2. Check and tighten any loose screws in the motor housing (but don't overtighten). 3. Ensure the screws securing the fan blade to the motor assembly are tight. Remember to turn off the main power before doing this. 4. Also, check the lower housing support set screw and tighten it securely.
J
Jacqueline MorenoAug 18, 2025
How to fix a Fanimation Fan that wobbles?
- K
  katherine24Aug 18, 2025
  If your Fanimation Fan wobbles excessively, try these solutions: * Tighten both setscrews securely in the downrod support. * Tighten the setscrew in the downrod/hanger ball assembly. * Check and tighten the screws securing the fan blade to the motor assembly. * Make sure the hanger bracket and/or ceiling timber batten is securely fastened, and secure the outlet box. * If the fan blades are out of balance, use the balancing kit.

Summary

Important Safety Instructions

General Safety Instructions

Key safety precautions for installation and operation.

Additional Safety Instructions

Specific safety guidelines related to electrical codes and installation.

Limited Lifetime Warranty

Warranty Terms and Conditions

Details of motor and part warranties, exclusions, and remedies.

Unpacking Instructions

Tools and Materials Required

Lists necessary tools and materials for fan assembly and installation.

Parts Identification

Lists and illustrates all components included in the fan package.

Energy Efficient Use of Ceiling Fans

Optimizing Fan Performance

Tips for efficient operation in summer and winter seasons.

Electrical and Structural Requirements

Outlet Box Mounting

Requirements for securely mounting the outlet box for fan support.

How to Assemble Your Ceiling Fan

Downrod Preparation

Steps for preparing the downrod, including cutting wires.

Electrical Safety Warnings

Critical warnings regarding electrical shock during installation.

How to Hang Your Ceiling Fan

Hanger Bracket Installation

Instructions for securely attaching the hanger bracket to the ceiling.

Safety Cable Attachment

Steps to attach the safety cable for added security.

Mounting the Fan Assembly

How to properly seat the downrod/hanger ball assembly onto the bracket.

How to Wire Your Ceiling Fan

Remote Receiver Wiring

Detailed steps for connecting wires to the remote receiver unit.

Wire Connection Safety

Warnings about secure wire connections and grounding.

How to Install Your Canopy Housing

Securing the Canopy

Instructions for attaching and securing the ceiling canopy.

Wire Management Warning

Warning to ensure wires are not pinched in the canopy.

How to Assemble Your Ceiling Fan Blades

Blade Attachment Hardware

Details on screws and washers for attaching fan blades.

How to Assemble Your Light Kit

Light Kit to Motor Assembly

Steps for connecting the light kit to the motor assembly.

How to Assemble Your Light Kit (Continued)

LED Assembly Connection

Connecting LED assembly to the light kit and motor.

Glass and Cap Installation

Instructions for installing glass and plastic caps.

How to Operate Your Ceiling Fan

Remote Control Functions

Explanation of remote buttons and their functions for fan control.

Remote Code Setting

How to set the dip switches for remote and receiver code combinations.

How to Operate Your Ceiling Fan (Continued)

Fan Speed and Light Control

Details on adjusting fan speed and light brightness via remote.

Sleep Timer Functionality

How to use the sleep timer feature to automatically turn off the fan.

Reverse Direction Switch

Instructions on how to change the fan's rotation direction.

How to Install Your Remote Control

Wall Holder Mounting

Instructions for mounting the remote control wall holder.

Maintenance

Cleaning Precautions

Guidelines for safe and effective cleaning of the fan.

How to Clean Your Ceiling Fan Blades

Blade Cleaning Method

Recommended method for dusting and cleaning fan blades.

Parts List

Component Identification

A detailed list of all fan parts with reference numbers and part numbers.

Ordering Replacement Parts

Information on how to order replacement parts.

Exploded-View Illustration

Component Diagram

A visual diagram showing the assembly of all fan parts.

Troubleshooting

Fan Not Starting

Common causes and suggested remedies for a fan that won't start.

Noisy Fan Issues

Potential causes and solutions for a noisy ceiling fan.

Fan Wobble Solutions

Reasons for excessive fan wobble and how to fix it.

Insufficient Air Movement

Causes for low airflow and recommended adjustments.

Fanimation XENO FP6729B Series Specifications

General

Control	Remote Control
Finish	Brushed Nickel
Light Kit	Optional
Light Kit Compatible	Yes
Reversible Motor	Yes
Light Kit Included	No
Model	FP6729B Series
Type	Ceiling Fan
Mounting Type	Downrod
Material	Metal
Warranty	Lifetime Motor Warranty