Fanimation GLIDEAIRE FPD8520 Series User Manual (English)

Questions and Answers:

D
Daniel HodgesJul 28, 2025
What to do if my Fanimation Fan will not start?
- J
  Jean MillerJul 28, 2025
  If your Fanimation Fan won't start, here's what to check: * See if a fuse is blown or a circuit breaker tripped. Check both main and branch circuits. * Inspect the power line connections to the fan and the switch wire connections in the switch housing for any looseness. Ensure the main power is off before checking! * If you're using a remote, the battery might be dead. Try replacing it with a fresh one.
C
Christopher CortezAug 3, 2025
What to do if Fanimation GLIDEAIRE FPD8520 Fan remote control does not work and the LED is flashing?
- M
  Miguel KirkAug 3, 2025
  If the remote control for your Fanimation Fan isn't working and the control indicator LED is constantly flashing, the battery/batteries are likely running low. Replace the battery/batteries.
K
Kristine HansenAug 9, 2025
How to improve air movement from my Fanimation GLIDEAIRE FPD8520 Fan?
- N
  Nancy SalazarAug 9, 2025
  If your Fanimation Fan isn't providing enough air movement, consider using a longer downrod. You can purchase a longer downrod from fanimation.com.
S
Shelly Woods DDSAug 14, 2025
Why does my Fanimation GLIDEAIRE FPD8520 wobble excessively?
- C
  Cameron VillaAug 15, 2025
  If your Fanimation Fan wobbles excessively, there are several potential causes: * The setscrew in the downrod support may be loose. Ensure both setscrews are securely tightened. * The setscrew in the downrod/hanger ball assembly could be loose. Tighten it securely. * The screws securing the fan blade to the motor assembly might be loose. Check and tighten them. * The hanger bracket and/or ceiling timber batten may not be securely fastened. Tighten the hanger bracket screws to the timber batten and secure the outlet box. * The fan blades might be out of balance. Use the balancing kit provided to correct this.
J
Julia StewartAug 21, 2025
How to fix a noisy Fanimation GLIDEAIRE FPD8520 Fan?
- M
  Mikayla PhillipsAug 21, 2025
  If your Fanimation Fan is making unusual noises, consider the following: 1. Ensure the blades are properly attached to the fan. 2. Check for loose screws in the motor housing and tighten them, but do not overtighten. 3. Make sure the screws securing the fan blade to the motor assembly are tight. 4. Verify the lower housing support set screw is tightened securely.