What to do if my Fanimation Levon Fan will not start?
If your Fanimation fan won't start, here's what to check: 1. Inspect the main and branch circuit fuses or circuit breakers. 2. Ensure the line wire connections to the fan and switch wire connections in the switch housings are secure. Remember to turn off the main power before checking! 3. Confirm the reversing switch is fully engaged to one side.
Why is my Fanimation Levon Fan so noisy?
If your Fanimation fan is excessively noisy, consider the following: * Make sure blades are properly attached to the fan. * Check and tighten any loose screws in the motor housing. * Ensure the screws securing fan blade holders to the motor flywheel are tight. * Verify wire connectors inside the housing aren't rattling against each other or the housing wall. Turn off the main power before checking! * If you're using a solid-state variable speed control, it may be causing motor noise. Try an alternative control method. * Tighten any loose screws holding the blades to the blade holders. * Securely tighten the lower housing support set screw.
How to fix a Fanimation Fan that wobbles excessively?
If your Fanimation fan wobbles a lot, here's what you can do: 1. Securely tighten both setscrews in the downrod support. 2. Tighten the setscrew in the downrod/hanger ball assembly. 3. Check and tighten the screws securing fan blade holders to the motor hub. 4. Ensure the fan blade holders seat firmly and uniformly to the motor housing surface. If seated incorrectly, loosen and retighten the screws. 5. Tighten the hanger bracket screws to the outlet box and ensure the outlet box is secure. 6. Try interchanging the position of fan blades to redistribute weight. For example, exchange blades in positions 1 and 3 or 1 and 4. If this does not improve wobble, exchange 2 and 3 or 2 and 4.
How to increase air movement from Fanimation Levon Fan?
To improve air movement with your Fanimation fan, consider using a longer downrod. For example, try a 12” downrod instead of the 6” downrod that came with your fan.
Essential safety precautions to prevent fire, shock, and personal injury during fan operation and servicing.
Guidelines for safe installation, wiring, grounding, and electrical connections, emphasizing licensed electrician use.
Details warranty coverage, exclusions, limitations, and customer responsibilities for motor and parts.
Lists necessary tools and materials, including wire specifications, for the fan assembly process.
Step-by-step guide for unpacking components and verifying all parts are present before assembly.
Guidance on optimal mounting location and conserving energy by turning off the fan when the room is unoccupied.
Instructions for using the fan efficiently in summer (cooling) and winter (heating) for optimal comfort and energy savings.
Specifies electrical supply needs (120V AC, 60Hz, 15A) and structural support requirements for the outlet box (50 lbs).
Steps for assembling hanger ball, downrod, and motor coupling cover, ensuring secure connections to prevent wobbling.
Instructions on preparing fan wires and performing final checks before hanging the fan.
Steps for securing the hanger bracket to the ceiling structure and attaching the safety cable for stability.
Guidance on properly seating the fan assembly onto the hanger bracket and securely fastening the safety cable.
Detailed instructions for making electrical connections, including grounding, using wire connectors for safe operation.
Steps to securely attach the canopy housing to the hanger bracket, ensuring wires are not pinched.
Instructions for assembling fan blades to their holders and attaching them securely to the motor hub.
Steps to disassemble and reassemble switch cup and adapter components for connection to the wiring harness.
Final steps for assembling the housing switch cup and restoring power for operation via the pull chain.
How to operate the fan using the pull chain switch, including speed control and reverse function.
Guidance on periodic cleaning using soft materials and avoiding water or abrasive agents.
A detailed list of all components included with the ceiling fan, with reference numbers and part numbers.
Instructions on how to order replacement parts, including necessary information like part number and model number.
A visual representation of all fan components, numbered for easy identification and reference during assembly and troubleshooting.
Addresses common fan issues like not starting, noise, wobbling, and poor air movement, providing probable causes and remedies.
General| Control Type | Remote Control |
|---|---|
| Blade Pitch | 14 degrees |
| Location | Indoor |
| Reversible Motor | Yes |
| Category | Ceiling Fan |
| Blade Span | 52 inches |
| Light Kit | Optional |
| Material | Wood |
To Next Page