To Next PageTo Next PageWhat to do if my Fanimation Fan will not start?
If your Fanimation Fan won't start, here's what to check: * First, examine the main and branch circuit fuses or circuit breakers to see if they've blown. * Next, ensure the line wire connections to the fan and switch wire connections in the switch housings are secure. Remember to turn off the main power before checking! * Lastly, try replacing the remote control battery with a new one.
What to do if my Fanimation Fan remote control doesn't work and the LED is flashing?
If the remote control for your Fanimation Fan isn't working and the control indicator LED is constantly flashing, the battery/batteries are likely running low. Please replace them.
Why is my Fanimation SLINGER LP8147SLMWBN Fan so noisy?
If your Fanimation Fan is making unusual noises, consider the following: 1. Make sure the blades are properly attached to the fan. Operating without blades attached will cause noise. 2. Check all screws in the motor housing and tighten them, but don't overtighten. 3. Ensure the screws securing the fan blade holders to the motor flywheel are tight. 4. Verify that the wire connectors inside the switch housing aren't rattling against each other or the housing's interior wall. Be sure to turn off the main power before checking! 5. Note that some fan motors are sensitive to solid-state variable speed controls, which can cause motor noise. It's recommended to choose an alternative control method. 6. Also, tighten the screws holding the blades to the blade holders.
How to fix a Fanimation Fan that wobbles a lot?
If your Fanimation Fan wobbles excessively, try these steps: * Tighten both setscrews securely in the downrod support. * Tighten the setscrew in the downrod/hanger ball assembly. * Check that the screws securing fan blade holders to the blades are tight. * Ensure the fan blade holders seat firmly and uniformly to the surface of the motor housing. If they don't, loosen and retighten the screws. * Make sure the hanger bracket screws are tightened to the outlet box and that the outlet box itself is secure.
How to improve air movement from my Fanimation SLINGER LP8147SLMWBN Fan?
If your Fanimation Fan isn't providing enough air movement, consider using a longer downrod, which can be purchased from fanimation.com.
General| Model Number | LP8147SLMWBN |
|---|---|
| Category | Fan |
| Type | Ceiling Fan |
| Blade Span | 52 inches |
| Motor Type | AC Motor |
| Motor Speed | 3 speeds |
| Control Type | Remote Control |
| Number of Blades | 5 |
| Mounting Type | Downrod |
| Indoor/Outdoor | Indoor |
| Reversible Motor | Yes |
| Warranty | Limited Lifetime |
| Material | Wood |
Key safety guidelines for fan installation and operation, including electrical shock and injury prevention.
List of necessary tools required for assembling the ceiling fan.
Details on required electrical wiring and outlet box specifications for safe installation.
Guidance on checking all components received against the parts list.
Tips for optimizing fan performance and energy savings through proper installation and operation.
Recommendations for fan placement to ensure optimal airflow and clearance from floor and walls.
Instructions for setting fan direction for summer cooling and winter heat circulation.
Step-by-step guide for assembling the main components of the ceiling fan.
Instructions for securely mounting the fan bracket and hanging the fan assembly.
Detailed steps for connecting the fan's electrical wiring to the power supply.
Procedure for attaching the canopy cover to conceal wiring and mounting hardware.
Guide for attaching the fan blades to the motor assembly securely.
Instructions for installing the light kit or decorative cap onto the fan.
Guidance on basic fan operation, speed control, and light functions.
Steps for mounting the remote control wall plate.
Routine checks and recommended maintenance for the ceiling fan.
Proper methods for cleaning fan blades without causing damage.
Comprehensive list of all fan components with their corresponding part numbers.
Information and contact details for obtaining replacement parts.
