10
Figure 8
8. Remove one of the two shoulder screws in the
hanger bracket and retain the screw for later. Loosen
the second shoulder screw without fully removing it.
(Figure 8)
Hanger Bracket
How to Assemble Your Ceiling Fan (Continued)
How to Hang Your Ceiling Fan
NOTE: If you are
not
sure
if
the
outlet
box
is
grounded,
contact a licensed electrician for advice, as it must be
grounded for safe operation.
1. Securely attach the hanger bracket to the outlet
box (not included) using the outlet box screws and
washers supplied with the outlet box. (Figure 3)
WARNING
To avoid possible fire or shock, be sure electricity is
turned off at the main fuse box before hanging.
(Figure 1)
WARNING
The fan must be hung with at least 7’ of clearance from
floor to ceiling fan. (Figure 2)
WARNING
The outlet box must be securely anchored. Hanger
bracket must seat firmly against outlet box. If the outlet
box is recessed, remove wall board until bracket
contacts box. If bracket and /or outlet box are not
securely attached, the fan could wobble or fall.
Figure 1
Figure 3
Main Fuse Box
Floor
Ceiling
Outlet Box
Figure 2
No Less
Than
7 Feet
Hanger
Bracket
Flat Washer
Screws (2)
Supplied with
Outlet Box
Tab
To Next Page
Loading...
