Need help?Do you have a question about the FANOX SIL-A and is the answer not in the manual?
General| Manufacturer | FANOX |
|---|---|
| Frequency | 50/60 Hz |
| Category | Relays |
| Protection Functions | Overcurrent, Earth Fault |
| Mounting | DIN Rail |
| Communication | Modbus RTU |
| Contact Rating | 5A @ 250V AC |
| Insulation Resistance | 100 MΩ |
| Electrical Life | 100, 000 operations |
| Contact Configuration | SPDT |
Guide for choosing and ordering specific SIL-A relay configurations.
Parameters for 50, 50/51, 50G, and 50/51G overcurrent protections.
Covers Phase Balance, Broken Conductor, Thermal Image, and External Trip protections.
Details on Circuit Breaker monitoring, opening failure, and trip circuit supervision.
Configuration for AC Reclosing (79) and Cold Load Pickup (CLP).
Covers Instantaneous Undercurrent (37), Trip Block (TB), and Second Harmonic Blocking (SHB).
Implementation of ZSI for coordinated protection schemes.
Configuration of physical inputs, outputs, and programmable logic.
Procedures for using the test menu and configuring settings.
To Next Page
