FG7X Housing Instruction Manual 20150101
FANTASEA MOISTURE DETECTOR
The alarm unit of the Moisture Detector is installed inside the
housing, opposite the latch dial (image #26 – item A). The Moisture
Sensor unit is installed just under the camera (image #26 – item B). A
thin wire connects these units. Moisture detectors are very sensitive,
so whenever moisture is detected by the sensor, the moisture
detector LED light begins flashing and a warning alarm starts
beeping, thereby alerting the user of a possible leak.
IDENTIFICATION OF PARTS
Never soak or wash the interior of the housing with water. This will set off
the alarm in a way that cannot be disabled, eventually causing irreparable
damage to the electronic unit!
The moisture detector is a bonus add-on component and not an integral
part of the housing. Accordingly, it is not part of the housing warranty
coverage. The moisture detector has no warranty coverage.
3V Lithium
#CR1220 Battery
(included)
To Next Page
Loading...