ENGLISH
36 / 48
3.10 Using the Auto Start function
The auto start function enables automatic playback of video, music or photo files directly after
switching on the device. You can store the files on on an USB drive .
The repeat mode for video playback (One file, All files, Repeat off) can be set or changed
during the playback and is preserved even after rebooting the device.
The auto start function can be executed either from the standby mode.
Set the Auto Start folders
- Create a folder called "autoplay" in the root directory of the disk
- Create three subfolders named "movie", "music" and "photo" and sort your movie, music
and photo files into the related folder
- Enable the option "Auto Start after power-on" at the Setup menu and set the desired start
folder.
- Turn the unit off and on again and then set the preferred repeat mode during video
playback.
To Next Page
Loading...
