ENGLISH
38 / 48
5. Upgrading the Firmware
The firmware is the operating system (OS) installed on the device. Firmware upgrades can
bring new features, improvements and bug fixes.
Please refer to USB Upgrade in chapter ‘3.1.5 Miscellaneous’ for more details.
You can also use the following method to upgrade the firmware:
- Copy ‘install.img’ to the root directory of a USB key
- Plug the USB key to the USB HOST port on the player
- Press and hold the POWER button on the front panel
- connect the player with power supply
- Wait for more than 10 seconds, and then loose your finger on the POWER button.
The upgrade process will start automatically. The LED indicator on the front panel will be
enlightened and flashing during installation. If it is connected to a TV set, an install page will
appear on the TV screen.
6. Appendixes
I/O INTERFACES SUPORTED:
Gigabit Ethernet port 10/100/1000 Mbps (RJ45)
HDMI 1.4 interface
2x USB 2.0 HOST (compatible to USB 1.1)
Composite (CVBS) A/V jack
S/PDIF optical jack
DC-IN 12V
FILE SYSTEM SURPORTED:
FAT/FAT32/NTFS/EXT3
VIDEO FORMATS SUPPORTED:
MKV, ISO (DVD & BluRay), AVCHD, MTS, M2TS, AVI, VOB, MOV, MP4, MPG, TS,
WMV, DAT, IFO, RM, RMVB, M4V, ASF, FLV, XviD, DVD menu playback, H.264,
resolution up to 720p/1080i/1080p/1080p/24p
3D VIDEO FORMATS SUPPORTED:
3D Frame Packing (3D BD), 3D MVC (Multiview Video Coding), 3D SbS (Side by Side)
3D TaB (Top and Bottom)
To Next Page
Loading...
