Fantech FR Series User Manual

FR Series
Inline Centrifugal Fans
Ventilateurs Centrifuge en ligne
Ventiladores para Conductos Circulares
To ensure quiet operation of ENERGY
STAR® qualied inline and remote fans,
each fans shall be installed using sounds
attenuation techniques appropriate for
the installation. For bathroom and general
ventilation applications, at least 8 feet of
insulated duct shall be installed between
the exhaust or supply grilles(s) and the fan.
For kitchen range hood remote ventilation
applications, where metal duct is generally
required by code, a metal sound attenuator
shall be installed between the range hood
and the fan.
Pour assurer un fonctionnement silencieux
des ventilateurs et des ventilateurs
à distance qualiés ENERGY STAR®,
chaque ventilateurs doit être installé en
utilisant des techniques d'atténuation du
son appropriées pour l'installation. Pour
les applications de salles de bain et les
applications de ventilation générales, au
moins 8 pieds de conduits exible isolé
doivent être installées entre les grilles
d'évacuation et d'approvisionnement du
ventilateur. Pour les applications de hotte
de cuisinière à distance, où un conduit en
métal est généralement requis par le code
du bâtiment, un atténuateur acoustique en
métal doit être installé entre la hotte et
le ventilateur.
Para asegurar una operación silenciosa
de los ventiladores en línea certicados
ENERGY STAR, cada ventilador debe
instalarse utilizando técnicas de atenuación
de sonido apropiadas para cada caso.
Para baños y aplicaciones comunes de
ventilación se recomienda instalar por lo
menos 8’ de ducto exible con aislamiento
entre la rejilla de expulsión y/o inyección
y el ventilador. Para campanas de cocina
con un ventilador de extracción remoto,
done se usa por código ducto rígido, se
recomienda instalar un atenuador de
sonido entre la campana y el ventilador.
Installation and Operation Manual
Manuel d'installation et d'opération
Manual de Instalación y Mantenimiento
Item #: 401444
Rev Date: 2017-02-27
Techical / Customer Support:
United States Tel.: 800.747.1762 Canada Tel.: 800.565.3548

Fantech FR Series Specifications

General

Brand	Fantech
Model	FR Series
Category	Fan
Language	English

Summary

Safety Warnings

General Safety Precautions

Essential safety guidelines for installation, operation, and maintenance to prevent hazards.

Installing Mounting Bracket & Fan

Fan Mounting Location Criteria

Guidelines for selecting an optimal fan mounting location considering noise and accessibility.

Bracket and Fan Installation

Steps for attaching the mounting bracket and then the fan to the bracket securely.

Duct Connection and Insulation

Instructions for connecting ductwork to the fan, emphasizing insulation for quiet operation.

Installing DG Supply/Exhaust Grill

Grill Mounting and Collar Installation

Selecting grill location, preparing opening, and installing collar/damper with ductwork.

Final Grill Attachment

Securing the grill to the collar and sealing any gaps for airtightness.

Electrical and Wiring Details

Electrical Connection Procedure

Guide to connecting electrical supply, including wire connections and securing.

Fan Wiring Diagrams

Diagrams illustrating standard, speed-controlled, and multi-location fan wiring configurations.

Troubleshooting

Fan Operation Issues

Steps to diagnose and resolve problems if the fan fails to operate correctly.

Maintenance Instructions

Warranty Information

Five Year Warranty Coverage

Details of the 5-year warranty policy, including repair, replacement, and return procedures.

Warranty Exclusions and Limitations

Specific conditions, damages, and applications that are not covered by the warranty.

Warranty Validation Requirements

How to ensure the warranty is valid, including keeping proof of purchase.

Notes