Do you have a question about the Fanvil H5 and is the answer not in the manual?
Flash memory | 8 MB |
---|---|
Internal memory | 16 MB |
Operating system installed | VxWorks |
Dual-Tone Multi-Frequency (DTMF) modes | In-band, Out-of band, SIP info |
Handset type | Wired handset |
Product type | IP Phone |
Product color | Black |
Firmware upgradeable | Yes |
Number of programmable keys | 6 |
Voice codecs | G.711a, G.711u, G.722, G.723.1, G.726, G.729ab |
Caller ID | - |
Lines quantity | - lines |
Call log entries | 300 |
Phonebook capacity | - entries |
RJ-9 ports quantity | 1 |
WAN connection type | RJ-45 |
USB 2.0 ports quantity | USB 2.0 ports have a data transmission speed of 480 Mbps, and are backwards compatible with USB 1.1 ports. You can connect all kinds of peripheral devices to them. |
Ethernet LAN (RJ-45) ports | 2 |
Front camera | No |
Networking standards | IEEE 802.1x |
Ethernet LAN data rates | 10, 100 Mbit/s |
Ethernet LAN interface type | Fast Ethernet |
Display diagonal | 3.5 \ |
Display resolution | 480 x 320 pixels |
Number of handles included | 1 pc(s) |
Operating temperature (T-T) | 0 - 40 °C |
Operating relative humidity (H-H) | 10 - 65 % |
Power consumption (typical) | 2.8 W |
Depth | 213 mm |
---|---|
Width | 170 mm |
Height | 130 mm |
Using PoE or external power adapter for device operation.
Connecting power adapter, network, PC, and handset to device ports.
Methods for obtaining an IP address (DHCP, Static IP, PPPoE).
Steps to access and log into the phone's web setting interface.
Performing blind and attended transfers to redirect calls to other parties.
Logging into the device's web portal using username and password.
Exporting/importing configurations and resetting the device to factory defaults.
Setting up Virtual Private Network connections for secure remote access.
Configuring the SIP service for individual phone lines.
Defining flexible dial rules using full or prefix matching and aliases.
Setting up Virtual Private Network connections, including L2TP and OpenVPN modes.