To Next PageTo Next Page
Need help?Do you have a question about the Fanvil H3 and is the answer not in the manual?
General| HD Audio | Yes |
|---|---|
| Headset Support | Yes, via 3.5mm jack |
| BLF (Busy Lamp Field) | Yes |
| WiFi | No |
| Bluetooth | No |
| Audio Codecs | G.711, G.729, iLBC |
| Network Interfaces | 2 x 10/100/1000 Mbps Ethernet ports |
| Protocols | SIP, RTP, RTCP, DHCP, HTTP, TFTP, SNTP |
| Power Supply | PoE |
| Supported Languages | English, Chinese |
| Conference | Up to 5 participants |
| Features | Call hold, call transfer, call forward, call waiting, DND, auto answer |
| Local Phonebook | 1000 entries |
| Display | 2.4-inch color LCD |
Learn how to identify your Fanvil phone model for proper setup and compatibility checks.
Ensure your Fanvil phone is loaded with the correct firmware version for optimal performance.
A fully configured and operational DHCP server is a prerequisite for network device setup.
Verify the PBXware version to ensure it meets the requirements for phone integration.
Connect the phone to power using the provided DC power adapter and an electrical outlet.
Learn how to power the phone using a PoE-compliant network connection, simplifying cabling.
Discover the methods to retrieve the phone's IP address for web interface access.
Understand the procedure to reset the phone to its default factory settings.
Guide to manually configure UAD settings, create extensions, and register the phone.
Automate phone registration using DHCP or static IP and provisioning server settings.
