Need help?Do you have a question about the Fanvil i10V and is the answer not in the manual?
General| Audio Codec | G.711, G.722, G.729 |
|---|---|
| Network | 10/100 Mbps Ethernet |
| Installation | Wall-mounted |
| Operating Humidity | 10% to 90% (non-condensing) |
| Resolution | 320 x 240 |
| Audio | Full duplex |
| Power Supply | PoE or 12V DC |
| Protocols | SIP |
| Weight | 500 g |
Provides an overview of the configuration steps for direct IP calls between i10V and C600.
Identifies the Fanvil i10V and C600 as the supported devices for direct IP calling.
Details the necessary equipment and initial setup steps before configuring devices.
Illustrates the physical network connections between i10V, C600, and the PoE switch.
Steps to configure the i10V's DSS key for direct IP dialing to the C600.
Steps to enable direct incoming calls on C600 and set up speed dial to i10V.
To Next Page
