R
Rodney SanchezJul 26, 2025
What to do if Fanvil i12 Intercom System device could not register to a service provider?
- Kkevin97Jul 26, 2025
If your Fanvil Intercom System device isn't registering, first ensure it's properly connected to the network via the [Network] interface, not the [Computer] interface. Then, check if the device has obtained an IP address in the system information. If the IP address shows as 'Negotiating...', verify your network configuration. If the network connection is fine, double-check your line configuration. If issues persist, contact your service provider.