Fanvil Technology Co. Ltd
Addr:10/F Block A, Dualshine Global Science Innovation Center, Honglang North 2nd Road, Bao'an District, Shenzhen, China
Tel: +86-755-2640-2199 Email: sales@fanvil.com support@fanvil.com Official Web:www.fanvil.com
2. Operation Guide
First, you need to prepare the environment, then you should get you device into post mode. Finally
you can update your device through tools in your computer. Please check the following steps for
detail.
2.1. Prepare the environment
Step1.
Refer to the connection diagram, connect the computer and Fanvil industry products to the same
PoE switch with Network cable.
Step2.
Add IP address 192.168.10.X for example 192.168.10.2 on the PC.
(IP address between 192.168.10.2-192.168.10.254 is ok)
Step3.
Download the new version you want to update, and save it in your computer. For example:
D:\333\iSeries2.8.2.7009T20210531154501.z
Step4.
Prepare FTP server and load the update file:
① Click http://download.fanvil.com/HowTo/UpdateInPostMode/wftpd32.rar to download
wftpd32.exe, and open WFTPD.exe, click Security and select Users/rights.
To Next Page
Loading...
Need help?
General
