ENGLISH
GB-30
Full-integrated model
Install the hook on the aesthetic wooden panel
and put the hook into the slot of the outer door
of dishwasher (see gure A). After positioning
of the panel, x the panel onto the outer door by
screws and bolts (See gure B).
A
1. Take away the four short screws
2. Pin up the four long screws
B
Step 3. Tension adjustment of the door spring
1. e door springs are
set at the factory to the
proper tension for the
outer door. If aesthetic
wooden panel are
installed, you will have
to adjust the door spring
tension.
To Next Page
Loading...
Need help?
General
