ENGLISH
GB-47
e softener should be adjusted according to the
hardness of the water in your area. Your local
Water Authority can advise you on the hardness
of the water in your area.
Adjusting salt consumption
e dishwasher is designed to allow for
adjustment in the amount of salt consumed
based on the hardness of the water used. is is
intended to optimise and customise the level of
salt consumption.
Please follow the steps below for adjustment in
salt consumption.
1. Switch on the appliance;
2. Press the Program button for more than
5seconds to start the water softener set
model within 60 seconds after the appliance
was switched on;
3. Press the Program button to select the proper
set according to your local environment, the
sets will change in the following sequence:
H1->H2->H3->H4->H5->H6;
To Next Page
Loading...
Need help?
General
