ENGLISH
GB-48
4. Without operation in 5 seconds or press the
Power button to complete the setup and exit
the setup mode.
WATER HARDNESS
Water softener level
Salt
consumption
(gram/cycle)
German
°dH
French
°fH
British
Clarke
Mmol/I
0 - 5 0 - 9 0 - 6 0 - 0.94 H1-> Rapid Light bright 0
6-11 10-20 7 - 14 1.0-2.0
H2-> 90 min Light
bright
9
12 - 17 21 - 30 15-21 2.1 - 3.0
H3-> 90 min, Rapid
Light bright
12
18-22 31 -40 22 - 28 3.1 -4.0 H4-> ECO Light bright 20
23 - 34 41 - 60 29-42 4.1 - 6.0
H5-> ECO, Rapid Light
bright
30
35 - 55 61 - 98 43 - 69 6.1 - 9.8
H6-> ECO, 90 min
Light bright
60
1°dH=1.25 °Clarke=1.78 °fH=0.178mmol/l
e manufactory setting: H3
Contact your local water board for information
on the hardness of your water supply.
Please check the section 3 «Loading e Salt
Into e Softener» of PART I: Generic Version,
If your dishwasher lacks salt.
NOTE:
If your model does not have any water softener,
you may skip this section. Water Softener
To Next Page
Loading...
