How do I fix a 'Mag Verify Error' on my Fargo Persona Persona C30e Printer?
If your Fargo Printer displays a 'Mag Verify Error', it means the Printer is unable to verify encoded data. Check to ensure that the cards are loaded with the Magnetic Stripe facing Up and towards the front of the Printer.
Why am I getting a 'No Magnetic Encoder Installed Error' on my Fargo Persona Persona C30e?
If your Fargo Printer displays a 'No Magnetic Encoder Installed Error', it means a print job with Magnetic encoding was sent with no Magnetic encoder installed in the Printer. Verify that the Printer has a Magnetic Encoder installed by opening the front cover and checking for a Magnetic Module. If present, ensure it is seated securely in the Magnetic Module docking station.
What does 'Headlift Motor or Sensor Error' mean on my Fargo Persona Persona C30e?
If your Fargo Printer displays a 'Headlift Motor or Sensor Error', it means the Headlift Sensor is not detecting movement from the Headlift Cam. Press the Cancel Print button on the Driver Monitor Error Display Message.
Comprehensive guide for installing the Persona C30e Card Printer.
Steps for connecting power, installing ribbon, and loading cards into the printer.
Guide for installing the printer driver and performing a test print.
Troubleshooting for communication, print process, card feeding, ribbon, and encoder issues.
Guide for identifying and fixing image defects, darkness, and placement issues.
Procedure for cleaning the printer's printhead to maintain print quality.
Procedure for cleaning rollers to prevent jams and contamination.
Step-by-step guide for downloading and installing firmware updates.
Procedures for contacting technical support for assistance with the card printer.
To Next Page
General
