Faro FocusS 150 - Select Sensors; Scan with Color

FARO
®
Laser Scanner Manual
63
Chapter 7: Controller Software
7.3.4 Select Sensors
Figure 7-42: Scan Parameters - Select sensors
Opens the screen to enable or disable the automatic use of the data of the
built-in sensors for the scan registration in SCENE.
7.3.5 Scan with Color
Switch colored scan recording on or off. If switched on, the scanner will also
take color photos of the scanned environment with the integrated color
camera. These photos will be taken immediately after the laser scan and will
be used in the point cloud processing software SCENE to automatically
colorize the recorded scan data.