Faro PanoCam - Troubleshooting PanoCam Detection; Error Message: Camera Not Connected

Troubleshooting
Error Message: "Please connect a panorama camera and ensure that it is switched on."
This error is caused when the Focus Laser scanner does not detect the PanoCam:
Verify the PanoCam is powered on and that the PanoCam is correctly mounted (see the PanoCam Quickstart Guide for
mounting information).
https://knowledge.faro.com/Hardware/3D_Scanners/Focus/PanoCam_Installation_and_Setup_for_the_Focus_S_Series
Updated: Wed, 27 Oct 2021 07:49:01 GMT
4