www.fassride.com
(866) 769.3747
STEP 4:
MOUNT FUEL SYSTEM
J. Apply motor oil to gasket located on filters. Attach to system and hand tighten.
Extreme Water Separator -
Install XWS-3002 on side of
pump with draw tube in the
middle of the filter nipple.
Particulate Filter –Install PF-3001 on
filter nipple without the draw tube.
Make sure to insert O-Ring provided
on nipple.
Note: O-Ring must be put back on suction side of pump. Failure
to do so can result in priming issues, cavitation or pressure losses.
To Next Page
