IDENTIFICATION OF
THE CRANE MODEL
F 240
7
IDENTIFICATION OF THE CRANE MODEL
Essential data for the identification of the crane are given on the plate
DE2141, fixed to the base. (Fig. 2)
1—Crane model
2—Serial Number
3—Year of manufacturing
The model, the version of the crane, the year of manufacturing and the
serial number are stamped on the base (fig. 3) in the following
sequence:
*F240.22*06*0100*
( !) UNDER NO CIRCUMSTANCES SHOULD THE
DATA MARKED ON THE PLATE AND PUNCHED
ON THE BASE BE ALTERED.
It is essential to give the correct crane model and serial number, when you
contact the Service and Parts Department.
The exact crane model, serial number and description of implements will
enable FASSI Service Department to give a rapid and efficient response.
serial no.
year of manufacturing
version /.23/.24
model
fig. 2
1
2
Identification
plate
Punching
fig. 3
c IV
3
DE 2141
To Next Page
Loading...