Process Controllers
FAST Lit. Part No. 229-51317 Rev. B (EMPLOYEE) 11/01/2007 (L20-321 rev 0 12/07) Page 3
© 2005-2007 Food Automation – Service Techniques, Inc. All Rights Reserved
This document contains confidential information. The dissemination, publication,
copying, or duplication of this document without prior written authorization is
strictly prohibited.
Parts Description – (FASTRON.)
VC-210 Controller
Part Function
1. SCAN key
• Used for recipe review during idle.
• Used to review time remaining during multiple cooks
(press & hold)
2. EXIT FILL key
• Depressing this key for three seconds will force a filter
that will reset all internal filter counters.
3. VFD (Vacuum Fluorescent
Display)
• Bright blue for easy viewing. Displays programming
and cook cycle information.
4. Programming Buttons
• Used to access programming mode and change
parameters.
5. Changeable Menu Strip
• Menu items are printed directly on easy-to-change menu
strip.
6. SCK® Link LED
• LED will light when communications is enabled.
7. IR Port (Infrared) – Optional
• Used to download programming from wireless device.
8. Product Buttons
• Used to activate cook cycles and for certain
programming functions.
9. Tech Support/Serial # Window
• Easy access to FAST tech support center.
10. Indicator Lights
• Light up when product key is activated.
11. EXIT COOL key
• Used to exit setback (COOL) mode. Also used to cancel
hold alarms, as well as scroll through active holds when
held down.
To Next Page
Loading...
Need help?
General
