Process Controllers
FAST Lit. Part No. 229-51317 Rev. B (EMPLOYEE) 11/01/2007 (L20-321 rev 0 12/07) Page 9
© 2005-2007 Food Automation – Service Techniques, Inc. All Rights Reserved
This document contains confidential information. The dissemination, publication,
copying, or duplication of this document without prior written authorization is
strictly prohibited.
RECIPE PROGRAMMING (1724)
KEY PRESS DISPLAY ACTION
1
Enter Program mode
OR
• To enter programming mode,
press and hold the "P" key for 3
seconds.
• Scroll down to “Programming.”
• Press the “P” key to lock in
entry.
• The display will prompt user to
enter a pass code.
2
Enter Pass Code
ENTER CODE
****
RECIPE
• Enter pass code 1 7 2 4.
• Press the “P” key to lock in your
entry.
• Display will show “Recipe.”
Press the “P” key.
3
Choose a Product Key
(Recipe)
OR
SELECT PRODUCT
TO PROGRAM
Choices are:
ALL, NAME, TIME,
TEMPERATURE,
TIMING, PRESSURE
1
,
ALARM, ALARM
NAME, ALARM
DONE, TONE, HOLD
TIME, HOLD LINK,
FLTR LCKOUT,
PRODUCT CNT, RQI
TRACKER
2
, EXIT
1
”Pressure” will only appear if
appliance is a pressure fryer.
2
”RQI TRACKER” will only
appear if it was selected in
System Programming.
• Press the product key to be
programmed. That key’s LED
will remain lit.
• Scroll to the feature you want
changed and press the “P” key.
NOTE: Selecting “ALL”
allows you to review and/or
change all parameters for
that key.
To jump to a specific
feature, select one from the
list and follow the
appropriate instructions to
make the changes.
To Next Page
Loading...
Need help?
General
