Transmitting
To call a station, press and hold the PTT switch, then speak
into the microphone using your normal voice. Release the PTT
switch to receive.
• The transmit indicator light is Red when transmitting and
Green when receiving a signal.
Operating modes
There are two basic operating modes for this radio VFO/MR
mode and Channel Only mode.
a) In VFO/MR mode you have all frequencies available to
you.
b) In MR mode you program memory channels which are
then available for quick access
General
Use [VFO] key to abort MENU or changes.
Use [PTT] switch to confirm changes on [F] settings.
Full charge is 7.1V -Light changes from red to green on
cradle.
DC LO comes on at 5.5V
Approx. charge time from DC LO 1200 mA battery is
10Hr.
10
To Next Page
Loading...
