FDC FD-150A - Deleting Settings; Deleting a memory channel; Deleting all settings

20
DELETING SETTINGS
Deleting a memory channel
a) Select the desired memory channel to delete.
b) Turn the transceiver OFF.
c) Press and hold the [VFO] key turn the transceiver ON.
d) The LCD displays "DEL--?".
e) Press the [VFO] key again to delete the selected channel
and exit the delete mode.
Deleting all settings
a. Switch the transceiver OFF, and press [F] + [ MONITOR ]
key, then turn the power switch/volume control on.
b. Rotate the power switch/volume control to switch the
transceiver ON and hold for 2 seconds. LCD display
shows "SET".
c. Input the password by digit keypad: 6668 and press PTT
key to complete the deletion. LCD display shows
"ERASE".
d.
Finish deleting all storing information.