Feasycom FSC-BT691 - General Commands

To Next Page

To Previous Page

l If the notification contains multiple parameters, the parameters should be

separated by ","

e.g.

1. When the GATT Server profile receives "1234567890" sent by the mobile

phone

>> +GATTDATA=10,1234567890

5.3 General Commands

5.3.1 UART communication test

Format: AT

Response: OK

Description:

Test the UART communication between HOST and Module after power on or

change baudrate.

Example: UART communication test

>> OK

5.3.2 Read Firmware Version

Format: AT+VER

Response: +VER=Param

Param: Firmware version (15 Bytes ASCII)

Example: Read module’s firmware version

AT+

VER

>> +VER=1.0.1,FSC-BT691

>> OK