HPB
TM
Series
© Copyright 2018 Fluid Equipment Development Company | www.fedco-usa.com
- 23 -
Specications Continued
Maintenance Schedule
By following the schedule of preventive maintenance presented below, the HPB will deliver years
of trouble-free performance.
One (1) day after commissioning
1. Fill out and submit all warranty documentation to FEDCO.
Six (6) months after commissioning
1. Inspect for leaks, damaged gaskets and condition of all pipe couplings.
2. Wipe booster and baseplate with a clean, damp cloth.
Annually
1. Inspect for leaks, damaged gaskets and condition of all pipe couplings.
2. Wipe booster and baseplate with a clean, damp cloth.
Every ve (5) years
1. Annual maintenance per above.
2. A complete disassembly, cleaning and detailed inspection of all booster components is recom-
mended. Refer to Booster Overhaul in the HPB-2800 Overhaul Manual. HPB overhaul part kits
can obtained by contacting FEDCO.
NOTES: Please provide unit serial number when ordering eld service kits.
Service Parts Kits
Contact a FEDCO representative for recommended spare parts.
Ordering Parts
To order a component or service kit, simply contact a FEDCO representative at:
ATTN: Field Service Department Additional Contact Information:
FEDCO Tel 734-241-3935
800 Ternes Drive Fax 734-241-5173
Monroe, MI 48162 Email sales@fedco-usa.com
USA techsupport@fedco-usa.com
Web site www.fedco-usa.com
Choose the “Service and Support” tab
To Next Page
Loading...