FEDCO HPB-2800 - Page 25

To Next Page

To Previous Page

HPB

Series

- 25 -

Service Policy Continued

Start-Up Record

□ 1. All anchor bolts tightened to specications.

□ 2. All pipe couplings tightened to specications.

□ 3. Inlet pressure switch (if applicable) installed.

□ 4. System pipes are clean and upstream ltration in place.

□ 5. System leak checked and all air vented from system.

□ 6. ALL safety devices in place.

Installation and Start-up Information

Start-up Date: _________________________ Model #: _______________________________

Serial #: ______________________________ Installation Date: _________________________

Installed By: ___________________________

Operating Conditions

Pump Inlet Pressure: ______________ Turbine Inlet Pressure: ______________

Pump Outlet Pressure: ______________ Turbine Outlet Pressure: ______________

Pump Flow: ______________ Turbine (Brine) Flow: ______________

Bypass Flow Rate: ______________ (If equipped)

Aux Valve Position:

□ OPEN

□ PARTIAL

□ CLOSED

Pipe Connection(s)

□ Victaulic connection

□ Flanged connection: Flange Pipe Size (Inlet) __________, Gap __________

Flange Pipe Size (Discharge) __________, Gap __________

General Notes:

_____________________________________________________________________________

This report has been lled out by: __________________________________Date: ___________