EasyManua.ls Logo

FEDCO MSD-160 - Lifting and Handling Procedures

Default Icon
66 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
MSD
TM
Series
© Copyright 2018 Fluid Equipment Development Company | www.fedco-usa.com
- 12 -
Installation Procedures Continued
Horizontal Lifting and Handling
CAUTION
Observe all lifting precautions. Failure to follow all lifting and handling precautions may result
in serious injury! Unit weight is listed on the unit nameplate. Mechanical lifting equipment must
be used. MSD pumps can be lifted using approved lifting straps and suitable lifting equipment. The
straps must be installed every four (4) stages without disturbing the drain line. If straps are
placed around the drain line,or if an insu󰀩cient number of lifting straps are used, damage will oc-
cur.
NO
EXCESSIVE LOADEXCESSIVE LOAD
BENT DRAIN
LINE
Figure 9 - Improper Lifting Strap Positioning
YES
4 STAGE SPAN MAXIMUM
Figure 10 - Proper Lifting Strap Positioning

Table of Contents

Related product manuals