F13
X. Timer Function
The start timer will switch the air conditioner ON at the start time set in the hand-held
transmitter, while the stop timer will switch the air-con OFF at the specified stop time.
Both timers can be activated together to perform "ON-OFF-ON" or "OFF-ON-OFF"
operation. The setting of the timers is done using the HR. and MIN. buttons of the hand-held
transmitter in steps of 10 minutes. The LCD panel on the hand-held transmitter will show the
start and/or stop times of timer operation. In addition, the yellow LED on the LED board will
be lighted to indicate that at least one timer is in operation.
ON-OFF-ON Operation
If the current time is 8:00 PM, the following timer setting will turn off the air-con at 11:00
PM and turn it on again at 6:00 AM. This sequence will repeat in a cyclic manner.
STOP
START
PM
AM
6
8 11
Current
ON ON
OFF
Air-con
Status
ON-OFF-ON timer operation
OFF-ON-OFF Operation
If the current time is 11:00 AM, the following timer setting will turn on the air-con at 5:00
PM and turn it off again at 9:00 PM. This sequence will repeat in a cyclic manner.
STOP
START
PM
AM
9
5
11
Current
ON
OFF OFF
Air-con
Status
OFF-ON-OFF timer operation
To Next Page
Loading...
