Feider FAST175T - Chapter 11 Warranty; Chapter 12 Environmental Protection

27
Machine walking is
difficult
Foreign substance is wound on
wheels
Clean up foreign objects on the wheels
The ground is uneven
Adjust the height to the appropriate gear
√
The lawn is very lush
Adjust the height to the appropriate gear
√√√
Collection bag full
Clean up the garbage in the collection bag
Self-propelled is
very difficult
Self-propelled failure
Contact service agent repair
Clutch belt damage
Replacement belt
Clutch belt is not on the pulley
Reinstall the belt
Clutch belt wear
Adjust the tension
√√√
Self-propelled clutch pulley
damage
Replace the clutch pulley
√
Self-propelled driven pulley
damage
Replace the driven pulley
The internal teeth of the wheel
are worn
Replace the new self-propelled wheel
√√
Tensioner damage
Replace the new tensioner
Rear axle distortion
Corrected rear axle head
√
Roller brush stop
rotation
Self-propelled failure
Contact service agent repair
Roller brush drive belt damage
Replacement belt
√
The timing belt is damaged
Replace the timing belt
Synchronous pulley damage
Replace the timing belt pulleys
The Roller brush is entangled by
foreign objects
Cleaning roller brush
√√√
Auxiliary hose
suction function is
invalid
The inside of the hose is
blocked
Dredge hose
The suction port baffle is not
inserted in place
Insert the bezel into place
√√√
Auxiliary hose
blowing function is
invalid
The inside of the hose is
blocked
Dredge hose
The suction port baffle is not
unloaded
Unload the bezel
√
Warranty
This product is warranted in accordance with legal regulations for a 12 months period effective from the date of purchase by the
first user.
This warranty covers all material or production failures, it does not include: defects from normal wear & tear parts, such as
bearings, brushes, cables, plugs or accessories like drills, drill bits, saw blades etc.; damage or defects resulting from abuse, accidents or
alterations; nor the costs for transport.
We reserve the right to reject any claim where the purchase cannot be verified or when it is clear that the product was not
maintained properly. (clean ventilation slots, carbon brushes serviced regularly…)
Your purchase ticket must be kept as proof for date of purchase.
Your un-dismantled tool must be returned to your dealer in an acceptably clean state, in its original blow molded case if applicable
to unit, accompanied by your proof of purchase.
Environmental protection
Should your machine need replacement after extended use, do not put it in the domestic waste but dispose of it in an
environmentally safe way.