- 3 -
3.3 Mount the expansion base
Slide the magnetic base (the bottom part of Feiyu Pocket 3)
into the expansion base as shown in the gure. And make
the ball on the expansion base clip in the dovetail slot.
Slide it in the opposite direction of mounting to take o.
Use the expansion base to install tripod, wristband, and other accessories via the 1/4
inch screw hole and wristband slot on the base.
3.4 Usage for protective cover
When not in use, please cover the gimbal with the protective cover.
Hold the two sides of protective cover (which have an opening) rmly, and push it
down to cover the camera (As the picture shown below). Reveal the charging port
through the opening which is larger.
Pull the protective cover up in the same way in opposite direction to take it down.
To Next Page
Loading...
