To Next PageTo Next PageHow to fix a Fellowes Laminator with no glowing ‘blue’ Power on LED?
If the ‘blue’ Power on LED is not glowing on your Fellowes Laminator, make sure the machine is switched on at the right rear side and at the wall socket. Then, press the power standby button.
What to do if Fellowes Laminator pouch does not completely seal the item?
If your Fellowes Laminator pouch doesn't completely seal the item, try passing it through the laminator a second time. The item may be too thick to laminate in a single pass.
General| Max Laminating Width | 12.5 inches |
|---|---|
| Number of Rollers | 2 |
| Auto Shut-off | Yes |
| Jam Prevention Technology | Yes |
| Pouch Thickness | 3 mil and 5 mil |
| Laminating Thickness | 3 mil and 5 mil |
List of phone numbers for Fellowes support in various countries worldwide.
Labeled diagram identifying the external controls and features of the laminator.
Visual steps for initial setup and basic operation of the laminator.
Detailed descriptions for each labeled control (A-K) on the laminator.
Lists the performance metrics and technical specifications of the laminator.
Essential safety guidelines for operating the laminator to prevent hazards.
Highlights key features like AutoSense, Reverse, Sleep Mode, and HeatGuard.
Preparation steps and checks required before starting the lamination process.
Comprehensive step-by-step instructions for the lamination process.
Common problems encountered with the laminator and their solutions.
Contact information for customer service and technical support.
Guidance on proper storage and cleaning procedures for the laminator.
