How to fix a Fellowes Laminator with no glowing ‘blue’ Power on LED?
If the ‘blue’ Power on LED is not glowing on your Fellowes Laminator, ensure that the machine is switched on at the right rear side and at the wall socket. Also, make sure to press the power standby button.
Why does my Fellowes Venus 2 A3 Laminator pouch not completely seal the item?
If your Fellowes Laminator pouch doesn't completely seal the item, it might be because the item you're trying to laminate is too thick. The maximum document thickness that the laminator can handle is .03 inches. Try passing the pouch through the laminator a second time.
What to do if the pouch is damaged after lamination in Fellowes Laminator?
If the pouch is damaged after lamination in your Fellowes Laminator, it could be due to damaged rollers or adhesive on the rollers. To resolve this, pass cleaning sheets through the machine to test and clean the rollers.
To Next Page
General