1270P MONITOR
SPECIFICATIONS
Product Release No.: PR 435 (This is not a model number)
Part Number: 71-1271-000 (120V, 60Hz) 71-1271-060 (230V, 50Hz) Eur
71-1271-040 (230V, 50Hz) 71-1271-030 (240V, 50Hz) Aust
Power Requirement: 360W
Power Output: 100W, THD <0.5% (bi-amped)
Inputs: XLR Balanced, mic-level (Mic input supplied w/full-time 15V phantom
pwr); 1/4" TRS balanced, line-level (LINE input); 1/4" TS unbalanced,
line level (AMP IN input)
Outputs: 1/4" TS unbalanced, line-level (LINE OUT output)
Frequency Response: 110Hz - 20k
Maximum Output SPL at 1M: 109dB (continous) 115dB (peak)
Input Sensitivity: Line: 100mV RMS, -20dBV and Mic: 10mV RMS, -40dBV
Amp In: 1V RMS, 0dBV (LEVEL @ max for all three inputs)
Tone Control: +/- 10 dB @ 12kHz
Low Freq. Driver: 10" (25.4 cm), 4Ω with 2" (5.1 cm) Voice Coil (p/n 0055911000)
High Freq. Driver: Coaxial Piezo Compression Driver, 1.5" Diaphragm (p/n 0055741000)
Maximum Output: 115dB (Continous), 121dB (peak @ 1 Meter)
Crossover Freq: 2.2kHz
Dimensions: Height:13 3/8" (34 cm)
Width: 13 3/8" (34 cm)
Depth: 9 1/8" (23.2 cm)
Weight: 22 lbs. (10 kg)
Product specifications are subject to change without notice
To Next Page
Loading...
