A PRODUCT OF
FENDER MUSICAL INSTRUMENTS CORPORATION
311 CESSNA CIRCLE
CORONA, CALIF. 92880 U.S.A.
Fender
®
and Bassman
®
are registered trademarks of FMIC.
Copyright © 2024 FMIC. All rights reserved.
PN 7082000211 REV C
IMPORTANT SAFETY INSTRUCTIONS
ADDITIONAL LANGUAGES
Manual available in additional languages at
www.fender.com/support
Product specifications subject to change without notice
SPECIFICATIONS
IMPEDANCES
POWER SUPPLY
POWER REQUIREMENTS
DIMENSIONS
WEIGHT
Input (pad off): 1MΩ Input (pad on): 127kΩ
Output: 1kΩ
85mA min @ 9VDC regulated adapter
5.5 x 2.1 mm barrel connector (not included)
9VDC
2.44” x 4.4” x 2.2” (62mm x 111.8mm x 55.9mm)
0.50 lbs (0.23kg)
•Read these instructions.
•Keep these instructions.
•Heed all warnings.
•Follow all instructions.
•WARNING: To prevent damage, fire or shock hazard, do not expose the unit or its AC
power to rain or moisture.
•Do not alter the AC plug of the connected power adapter.
•Do not drip or splash liquids on the unit.
•No user serviceable parts inside, refer servicing to qualified personnel only.
•WARNING: The unit must only be connected to a safety agency certified, regulated,
power source (adapter), approved for use and compliant with applicable local and
national regulatory safety requirements.
•Unplug the AC power adapter before cleaning the unit exterior. Use only a damp cloth
for cleaning and then wait until the unit is completely dry before reconnecting it to power.
•Amplifiers and loudspeaker systems, and ear/headphones (if equipped) are capable
of producing very high sound pressure levels which may cause temporary or permanent
hearing damage. Use care when setting and adjusting volume levels during use.
To Next Page
Loading...
