Fender Passport Conference 2 Series - Rear Panel Connections and Features; Speaker Outputs and Power Socket; Voltage Selector and Power Switch

ENGLISH
4
REAR PANEL
M. SPEAKER OUTPUTS: Connect Passport speaker
cables (included) here.
N. VOLTAGE SELECTOR: Change the setting of this
100V/120V–220V/240V switch only when using
Passport in a country that requires a dierent voltage
setting.
O. POWER: Turns Passport on and o.
P. POWER CORD SOCKET/FUSE : Connect power
cord (included) to this socket; plug other end into
a grounded AC outlet in accordance with correct
VOLTAGE SELECTOR (N) setting. To check/replace
fuse, unplug power cord and pry fuse holder from
POWER CORD SOCKET; replace fuse only with another
of the same type and rating.
SPECIFICATIONS
TYPE PR 844
POWER REQUIREMENTS 225W
POWER OUTPUT 175W
FUSE T4A H, 250V
AMPLIFIER TYPE Class D
SPEAKERS Two 5.25” woofers, four 2.75” HF drivers
DIMENSIONS AND WEIGHT Width: 25” (63.5 cm) Height: 19” (48.26 cm) Depth: 10” (25.4 cm) Weight: 31 lbs. (14.06 kg)
Product specifications subject to change without notice.