TBP-1
®
™
(This is the model name for warranty claims)
3
SPECIFICATIONS
Model Name: TBP-1 (Tube Bass Preamp)
Release Number: PR 611 (Not a model number)
Part Numbers (120V, 60Hz) US: 2147000000 (230V, 50Hz) ARG: 2147005000
(110V, 60Hz) TW: 2147001000 (230V, 50Hz) EUR: 2147006000
(240V, 50Hz) AUS: 2147003000 (100V, 50Hz) JPN: 2147007000
(230V, 50Hz) UK: 2147004000 (220V, 60Hz) ROK: 2147009000
Power Requirement: 25 W
Preamp Input Impedance: 1MΩ
Sensitivity: 7.8mV @ 100Hz, 14.8mV @ 1kHz for +4dBu at Main output
(-6dB Pad: out, Volume: 10, Bass: 10, Deep Boost: off, Mid: 10, Treble: 10,
Tube Overdrive: disabled, Vari-Q
TM
:disabled, Room Balance: flat,
Master Volume: 10, Effects Trim: 0)
Tone Controls Bass: 9dB range @ 40Hz (Mid: 10, Treble: 2)
Mid: 13dB range @ 400Hz (Bass: 2, Treble: 2)
Treble: 9dB range @ 4kHz (Bass: 2, Mid: 10)
Vari-Q
TM
: ±15dB @ 70Hz-2.0kHz sweepable
Room balance: ±7dB, center tilt frequency: 375Hz
Active Crossover Response: 3-pole (18 dB per octave) Butterworth
Crossover frequency: 100Hz-2.0kHz sweepable
Balanced Line Output Maximum Output: +19dBu minimum @ 20Hz, 600Ω
Frequency Response: ±0.1dB, 20Hz-20kHz
Distortion (THD): <0.05% @ 20Hz, +4dBu
Effects Loop Send Impedance: 800Ω balanced
Return Impedance: 10kΩ balanced
Nominal Level: -10dBV / +4dBu switchable
Tube Complement: Two 12AX7WA (0013341000)
Dimensions Height: 1.75 in (4.45 cm)
Width: 19 in (48.3 cm)
Depth: 11.9 in (30.2 cm)
Weight: 11.5 lb (5.2 kg)
Product specifications are subject to change without notice
To Next Page
Loading...
Need help?
General