ORDERING INFORMATION
Models and Part Numbers
Model EX 200™ (standard IP 55/NEMA 4 enclosure) P/N 32-091500-001
Model EX 200™ (explosion proof enclosure) P/N 32-091500-002
Model EX 200™ (Large IP 55/NEMA 4 enclosure) P/N 32-091600-001
EX 200™ Accessory Kit P/N 06-129400-001
The accessory kit is included with the EX 200™ and is located inside the enclosure. The
kit contains the following parts:
(1) 115 Vac mains voltage selector plug.
(1) 230 Vac mains voltage selector plug.
(1) self-stick temperature sensor (54 C) for installation on battery.
(1) self-stick vibration pad for installation on inside bottom of enclosure.
(1) 1.2 k end-of-line resistor for use in FAB-13 installation.
(1) Installation, Operation and Maintenance Manual.
(2) 5.1k end-of-line resistors for use with Class B wiring.
(6) NEMA rated conduit entry hole plugs.
Spare Parts
Spare parts available for the EX 200™ Control Panel include:
Description Part Number
PCB Assembly 06-129378-002
Front Panel Assembly 06-129393-001
Battery, 12V 12A-h (for 32-091500-001) 06-115915-021 (*)
Battery, 12V 35A-h (for 32-091600-001) 89-100052-001
* An optional 12V 21A-h battery is available for standard panels requiring longer battery
back up. Please contact FENWAL for further information.
FENWAL
Protection Systems FSS/MC-519 Rev BC Page 33
To Next Page
Loading...