SAFETY WARNING PRIORITIZATION
The warnings, cautions and notes in this manual are prioritized as illustrated below.
WARNING
FAILURE T
O HEED WARNINGS MAY
RESULT IN PERSONAL INJURY OR DEATH
Failure to heed cautions may
result in damage to the equipment
CAUTION
NOTE
Failure to he
ed notes may result in
the equipment not operating correctly
INCOMING INSPECTION
Upon receiving the EX 200™ Single Zone Control Panel, inspect the shipping carton for
damage before unpacking it. Notify the delivering carrier and FENWAL immediately if the
carton or equipment appears damaged. Unpack the carton and examine the contents
for damage. Save the carton and packing material for inspection and possible re-
shipment. Before installation, verify the contents of the shipping container are as noted
on the materials list below.
Qty.
Description Part Number
Small Enclosure:
1 EX 200™ Single Zone Control Panel 32-091500-001
1 12V, 12 A-h Sealed Lead Acid Battery 06-115915-021
Large Enclosure:
1 EX 200™ Single Zone Control Panel 32-091600-001
1 12V, 35 A-h Sealed Lead Acid Battery 89-100052-001
Common for Both Sizes:
1 Accessory Kit (contents below) 06-129400-001
(1) 115 VAC connector, (1) 230 VAC connector,
(1) Temperature sensitive label, (1) Vibration pad,
(1) 1.2 k resistor, (2) 5.1 k resistor, (6) conduit
entry hole plugs
FENWAL
Protection Systems FSS/MC-519 Rev BC Page 5
To Next Page
Loading...